M2-500X1
Features
Element Ready design protects against outdoor exposure
Conformal coated circuit board protects against dust and water
UV stable powder coated cast aluminum heatsink
Zinc Nickel-plated Marine grade brass connection terminals
C.L.E.A.N. input/output clip detection and indicator LEDs
Optimized using AudioGraph PowerCube measurement tool
Continuously Variable On Board Punch EQ
Includes RLC Remote Level Control
Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
Top Mounted Control Panel
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
Short Circuit & Over Current Protection
Variable Infrasonic Filter
Integrated Power and Speaker Terminals
Balanced Differential Inputs eliminates noise picked up by signal cables
RCA pass-thru outputs
Integration with OEM and Aftermarket Radios
"Auto-Sense" turn-on with remote out (high level in)
Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
Low Impedance Stability
Proprietary testing using RATS (Rockford Automated Testing System)
Specs
Class D
Channels: 1
Total Power: 500 Watts
Rated Power: 
300 Watts x 1 @ 4Ω
500 Watts x 1 @ 2Ω
Dynamic Power: 
350 Watts x 1 @ 4Ω
590 Watts x 1 @ 2Ω
Bridgeable: No
Frequency Response: 20 Hz - 250 kHz
Input Sensitivity:
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Total Hormonic Distortion: 4Ω: <1.0% / 2Ω: <1.0%
Signal Input: Low-Level: 2 RCA / High-Level: 4-Pin Molex
Signal Output: Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input)
Power Wire Gauge: 4 AWG
Speaker Wire Gauge: 8 AWG
Operating Voltage: 9-16 VDC
Recommended Fuse: 80A
Dimensions
Size (H x W x D): 1.9” x 6.8” x 8.5”
Shipping Weight: 4.8 lb.
What’s in the box
Mono marine amplifier
Remote Punch Level Control module
16.5' Remote Punch Level Control cable (RJ-25 connector on both ends)
7" Speaker input harness
3mm Hex key
Four 3/4" Screws
Two 1/2" Screws
5 Flat washers
1 Nut